Weld cleaning
Cougartron weld cleaning systems remove heat tint, oxide and discolouration from stainless TIG and MIG welds without pickling paste or grinding.
Start with the machine, then match it with the right brushes, fluids, holders and accessories for the job.
Start here
Choose a Cougartron weld cleaner for TIG, MIG and stainless fabrication work.
Best for: first-time buyers and machine upgrades →Find the right brush for your machine, weld type and cleaning speed.
Best for: replacement brushes and faster cleaning →Cleaning, polishing, marking and neutralising fluids for Cougartron processes.
Best for: correct finish and process control →Keep fluid moving to the brush and reduce stop-and-dip cleaning.
Best for: longer seams and regular production work →Leads, holders, clamps and machine-specific parts for Cougartron weld cleaners.
Best for: keeping machines set up and ready →Shrouds, sleeves and brush parts that help with access, control and brush life.
Best for: replacement parts and better brush handling →Shop weld cleaning
Machines, brushes, fluids, holders and accessories are listed together below. Use the category links above if you already know what part of the setup you need.
Start with the machine, then match the brush, holder and fluid to your application.
Choose a machine →Showing 17–32 of 69 results
CGT-650 is a convenient powder utilized with water to create weld cleaning solutions when conventional fluid storage and transportation are impractical. Combine 2.5 oz of CGT-650 with 1qt of water to produce 1qt of weld cleaning fluid – with the same potency as our CGT-350.
The FL20 is a compact fluid feed system for Cougartron weld cleaners operating under 80A output power.
It is built for Power30, Power30X and ProPlus users who want a cleaner way to handle weld cleaning fluid while working.
The system stores 1 quart of liquid, regulates flow to the brush tip, and helps remove the constant stop-and-dip routine from weld cleaning.
Machine sold separately.
Best for: regular weld cleaning, longer cleaning sessions, ProPlus users, Power30/Power30X users, shops that want better fluid control, and operators tired of dipping the brush every few strokes.
FL10 is a fluid pump unit compatible with all Cougartron weld cleaners under 80amps output power. It enables you to control the amount of fluid applied to the brush, thus increasing the efficiency of your cleaning process.
Our durable, acid-resistant gloves offer outstanding hand protection against a variety of chemicals used in industrial production.
FL10 is a fluid pump unit compatible with all Cougartron weld cleaners under 80amps output power. It enables you to control the amount of fluid applied to the brush, thus increasing the efficiency of your cleaning process.
Cougartron safety glasses are designed to shield your eyes against flying particles and liquid splashes generated by grinding and finishing, ensuring full frontal and side coverage.
Current sense clamp for the FL10 fluid feed system.
The Cougartron mobile equipment stand is our new accessory for your weld cleaner, designed to increase the flexibility and practicality of your work process. It is easily moved around your workshop and holds everything from your machine to spare parts, cables, and consumables.
Weld cleaning is easier when the setup works with you.
The Mobile Weld Cleaning Workstation gives you a stainless steel work surface, integrated fluid collection, tool holder, and wheels so you can move the cleaning job where it makes sense.
The 316 stainless work surface supports up to 250 lbs, and the integrated waste-fluid container holds 1 gallon. When it is full, remove the container, screw on the lid, and dispose of the fluid more cleanly and safely. The workstation weighs 48 lbs and is made from acid-proof composite material.
Best for: weld cleaning stations, stainless shops, passivation work, polishing, cleaner fluid handling, and teams that want a more organised setup around their Cougartron machine.
Spare infeed fluid hose for the FL10 fluid feed system.
Practical weld cleaning fluid container with a drilled cap to be used in combination with the fluid feed system.
The weld cleaner with a temper.
Our hardest-hitting weld cleaner, built for stainless fabricators that need speed, power, and a finish they are proud of.
The FURY 200XF removes heat tint, oxide, rust, and discoloration from stainless TIG and MIG welds – fast. With up to 200A of cleaning power and a fully integrated fluid feed system, it keeps the brush fed, the job moving, and the finish perfect.
Spare foam insert for the FL10 fluid feed unit and accessories.
A sturdy, waterproof carrying case offers the utmost protection of your Cougartron weld cleaner and equipment. Unbreakable even in case of relatively high impact. Comes in two sizes with custom foam inserts to hold your equipment in place.
New flexible wand for weld cleaning brushes. A perfect solution to cleaning outside and inside pipes, corners, and hard-to-reach areas. This wand allows you to position the brush at any angle thanks to its flexible rubber-coated shaft.
Build the setup
Start with the right power level for your welds, material thickness and weekly use.
Match the brush size and holder to the machine and the access around the weld.
Use the correct fluid for cleaning, polishing, marking or neutralising.
Add fluid feed when longer seams, fewer stops and better control matter.
Buying help
A complete setup usually includes a weld cleaning machine, the correct brush or wand, cleaning fluid, brush sleeves or shrouds, a work lead and the right holder for the machine. Starter sets are the easiest route if you are buying your first Cougartron system.
Start with the weld type, material thickness and how often you clean. For lighter TIG work, look at the Power and Precision machines. For regular stainless fabrication and heavier oxide, look at ProPlus or the FURY range.
Brush compatibility depends on the machine, holder and job. Power, ProPlus and FURY machines use different holder and brush combinations, so check the product page or ask us before ordering if you are unsure.
Use the fluid that matches the process: weld cleaning, polishing, marking or neutralising. The right fluid affects cleaning speed, finish and handling, so do not treat all fluids as interchangeable.
Not always. Manual fluid application works well for smaller jobs and occasional cleaning. Fluid feed helps when you clean longer seams, work for longer periods or want fewer stops during production.
Yes, but MIG welds and heavier oxide usually need more power. If MIG cleaning is part of your normal work, start by looking at ProPlus or the FURY range.
Weld cleaning removes heat tint, oxide and discolouration from stainless welds. When used correctly with the right Cougartron fluid and process, electrochemical weld cleaning also helps restore the stainless surface after welding.
Yes. Send us photos of the welds, material thickness and how often you clean. We can point you towards the right machine, brushes, fluid and starter setup before you buy.
Need the right weld cleaning setup?
A good weld cleaning result depends on the full setup, not just the machine. Send us your weld type, material thickness and a photo of the weld if you want us to confirm the right machine, brush, fluid and accessories.