FURY 200 Weld Cleaning Machine

Description

FURY200 Weld Cleaner

Maximum manual power for production weld cleaning.

FURY200 delivers up to 200 A for fast cleaning of long, heavily oxidized stainless TIG and MIG welds, including austenitic, duplex, super duplex, alloyed, and exotic grades.

Built for heavy, daily, production-led weld cleaning.

Where it fits

Choose FURY200 when 100 A is no longer enough.

FURY200 doubles the maximum output of FURY100 for larger welds, heavier oxidation, and longer production runs. It is the top manual-fluid machine in the range.

Why it makes sense

Why FURY200 makes sense.

Up to 200 A

Adjustable cleaning and polishing power from 20 to 200 A in 20 A steps.

Heavy TIG and MIG

Built for long, dark, heavily oxidized stainless welds.

Up to four brushes

Match one, two, three, or four brushes to the weld and required speed.

Advanced alloys

Suitable for austenitic stainless, duplex, super duplex, alloyed, and exotic grades.

100% duty cycle

Keeps working through demanding production schedules.

Mobile and robust

Puncture-proof wheels, detachable handle, cable holders, and drip tray.

Applications

Built for demanding stainless work.

Daily stainless TIG weld cleaning
Light and dark stainless MIG weld cleaning
Heavy heat tint and oxide removal
Weld cleaning and simultaneous passivation
Electropolishing stainless surfaces
Marking and etching with the correct Cougartron set
Workshop, fabrication, maintenance, and site work

FURY200 Weld Cleaner ready for workshop use

A better process

Replace slow, inconsistent finishing methods.

Pickling paste is slow and difficult to control. Grinding can mark the surface and add rework. Undersized machines make operators wait. FURY200 cleans and passivates in one controlled process so the finish stays consistent and the job keeps moving.

Clean the weld. Passivate the surface. Keep production moving.

Power and brushes

Scale the brush setup with the work.

Use one brush for precise work, two for broader welds, and three or four brushes when maximum coverage and speed are required. The 200 A output gives operators the power to tackle long MIG welds and heavy oxidation efficiently.

Mobility

Heavy-duty power that moves with the job.

The wheeled chassis, puncture-proof wheels, detachable handle, cable holders, and integrated drip tray make FURY200 easy to move and organized to store. Long work and ground leads give the operator useful reach around large fabrications.

Range position

The production-power machine in the Cougartron range.

PowerOne, Power30, and Power30X: compact TIG machines.
ProPlus: regular TIG and lighter MIG work.
FURY100 and FURY100XF: 100 A heavy-duty cleaning.
FURY200: maximum manual-fluid power for demanding production.
FURY200XF: the same 200 A platform with fully integrated fluid feed.

Features

20–200 A cleaning and polishing output in 20 A steps
2–10 A marking output in 2 A steps
100% duty cycle
One-, two-, three-, or four-brush operation
TIG and MIG weld cleaning
Austenitic, duplex, super duplex, alloyed, and exotic stainless grades
Cleaning, passivation, electropolishing, marking, and etching
Button-based acid-resistant control panel
Puncture-proof wheels and detachable handle
Cable holders and brush drip tray
Not compatible with fluid-feed systems
IP51 enclosure protection

Technical specifications

Features	FURY200
Power supply	240 V AC, 50/60 Hz, 10 A
Cleaning output	20–200 A, 20 A increments
Cleaning voltage	10–16 V DC
Polishing output	20–200 A, 20 A increments
Polishing voltage	10–12 V DC
Marking output	2–10 A, 2 A increments
Marking voltage	12 V AC
Duty cycle	100%
Input cable	12 ft
Work and ground cables	20 ft
Input cable cross-section	0.054 in²
Output cable size	2 AWG
Brush holder options	1, 2, 3, or 4
Fluid-feed compatible	No
Machine size	15 × 13 × 25 in
Height, handle extended	46 in
Enclosure protection	IP51
Certification	CE, UL, CSA

Set options

Choose the FURY200 set that fits your work.

Basic

Machine, transport case, foam insert, work and earth leads, drip tray, and protective cover.

Starter Set A

Basic equipment plus cleaning and neutralising fluids, one- and two-brush tools, FURY brushes, bottle, acid pot, cloth, and PPE.

Starter Set B

Starter Set A plus the Standard marking set and a custom stencil voucher.

Starter Set C

Starter Set A plus the Advanced marking set and a custom stencil voucher.

Set contents

Core equipment includes the FURY200 machine, large transport case and foam insert, heavy-duty work and ground leads with Dinse connectors, drip tray, protective cover, and the tools specified for the chosen set. Starter sets add cleaning and neutralizing fluids, brush tools, FURY brushes, bottles, cloths, PPE, and marking equipment according to set level.

Ordering

Set	Part number	Shipping weight
Basic	WELC1110	133 lb
Starter Set A	WELC1111	135 lb
Starter Set B	WELC1112	142 lb
Starter Set C	WELC1113	147 lb

Accessories

Use genuine Cougartron FURY brushes, cleaning and neutralizing fluids, replacement leads, brush holders, protective equipment, marking sets, and custom stencils. FURY200 uses manual fluid application; choose FURY200XF when integrated fluid feed is required.

Need help choosing the right FURY machine?

Send us a photo of your welds and tell us the material, weld process, and daily workload. We’ll help you choose the right machine and starter set.

Ask about FURY200

Technical document

Review official power ranges, dimensions, certification, and product data.

Download FURY200 datasheet

Additional information

Weight	N/A

Fury200 Weld-cleaner 230V

Description

Maximum manual power for production weld cleaning.

Choose FURY200 when 100 A is no longer enough.