Weld cleaning accessories
Keep your weld cleaner set up, protected and ready for the job. Find replacement leads, ground clamps, extension cables, transport cases, mobile stands, workstations and fluid feed systems.
Choose accessories by machine type, connector type and the way your team works around stainless fabrication.
How to choose
Start with your Cougartron model. Power, ProPlus and FURY machines can use different leads, handles, clamps and connector types.
Check whether your setup uses x-connector or dinse connections before ordering replacement cables, ground clamps or extension leads.
Use extension leads and wand extensions when you need more reach around larger structures, taller workpieces or awkward weld locations.
Products
Find leads, clamps, extension cables, transport equipment, workstations and fluid feed systems for Cougartron weld cleaning machines.
Send us your machine model and a photo of the connector or part you want to replace. We can help confirm the right accessory before you order.
Ask us before ordering →Showing 1–16 of 18 results
FL21 is the dedicated fluid-feed system for PowerOne. It uses a PowerOne-specific connector, 3 mm pump hose and 16 mm² internal wiring to deliver cleaning fluid to the brush tip. PowerOne sold separately.
Spare Cougartron lead with handle – fluid feed hose (4mmID) and sheath included.
FL20 is the current fluid-feed system for Power30, Power30X and ProPlus weld cleaners operating below 80 A. It pumps cleaning fluid directly to the brush tip, reducing repeated dipping and improving control. Machine sold separately.
FL10 is a fluid pump unit compatible with all Cougartron weld cleaners under 80amps output power. It enables you to control the amount of fluid applied to the brush, thus increasing the efficiency of your cleaning process.
FL10 is a fluid pump unit compatible with all Cougartron weld cleaners under 80amps output power. It enables you to control the amount of fluid applied to the brush, thus increasing the efficiency of your cleaning process.
Mobile equipment stand for Power30, Power30X and ProPlus. Organises the machine, leads, brushes and fluids on acid-resistant wheels; WELC2570.
Mobile 316 stainless steel weld-cleaning workstation with direct earthing, integrated tool holder and 3.8 L fluid collection. 113 kg load; WELC2889.
A sturdy, waterproof carrying case offers the utmost protection of your Cougartron weld cleaner and equipment. Unbreakable even in case of relatively high impact. Comes in two sizes with custom foam inserts to hold your equipment in place.
Heavy-duty black 6 m earth lead for Cougartron FURY machines. 200 A Dinse connection with flexible, chemical-resistant cable; WELC2578.
Heavy-duty orange 6 m handle lead for Cougartron FURY machines. 200 A Dinse connection with flexible, chemical-resistant cable; WELC2577.
4 m orange spare handle lead for Power30, Power30X and ProPlus. Rated to 50 A with Cougartron x-connector; part WELC2047.
Black 4 m earth lead with clamp for Power30, Power30X and ProPlus. Rated to 50 A with Cougartron X connector; WELC2118.
Practical carrying bag for your Cougartron machine and accessories. Equipped with straps, side pockets, and many compartments for smaller tools and equipment.
The Cougartron extension lead is 4m (13ft) long and will add extra mobility to your weld cleaning process.
The leads are best used on higher steel structures where you need additional flexibility. The lead comes in orange and black color variations.
Spare orange handle cable for FURY100 and FURY200 machines. The handle cable connects to the casing of the machine, while the handle connects to the weld cleaning brush wand.
The 250/500mm wand extension is a useful tool when cleaning hard to reach areas as it increases the total length of your brush wand.
Accessory types
Replacement handle cables, ground clamp cables and machine leads for keeping your weld cleaner connected and working correctly.
Add reach when cleaning larger stainless structures, frames, tanks or fabrications where the machine cannot sit close to the weld.
Reduce stop-and-dip cleaning by feeding weld cleaning fluid to the brush during longer or more repetitive cleaning work.
Move, protect and organise your machine with cases, bags, mobile stands and weld cleaning workstations.
Buying help
Start with the machine model and connector type. Some accessories are made for Power and ProPlus machines, while others are made for FURY machines with higher output and different connectors.
These are different connector types used across Cougartron machine setups. Check the connector on your current lead or machine before ordering a replacement cable, ground clamp or extension lead.
Use an extension cable when the weld cleaner cannot sit close to the workpiece, such as larger stainless structures, tanks, frames, railings or higher work areas.
Fluid feed is useful when you clean longer seams or repeat the same cleaning task often. It reduces stop-and-dip cleaning and gives the operator better control over fluid delivery.
Choose a mobile equipment stand if you mainly need to move and organise the machine, cables and consumables. Choose a weld cleaning workstation if you also need a dedicated work surface and fluid handling area.
Send your machine model, a photo of the connector or part, and a short note about what you are trying to do. That is usually enough for us to confirm the correct accessory.
Need the right part?
Machine accessories are not always universal. If you are unsure, send us your machine model and a photo of the connector or part you need.