Fury200XF Weld-cleaner 110/230V
Price range: £7,420.00 through £9,340.00
The weld cleaner with a temper.
Our hardest-hitting weld cleaner, built for stainless fabricators that need speed, power, and a finish they are proud of.
The FURY 200XF removes heat tint, oxide, rust, and discoloration from stainless TIG and MIG welds – fast. With up to 200A of cleaning power and a fully integrated fluid feed system, it keeps the brush fed, the job moving, and the finish perfect.
- Basic: machine + cables only
- A: best first time setup
- B: Set A + Standard Marking set
- C: Set A + Marking set + Printer
Description
Our hardest-hitting weld cleaner.
Some weld cleaners are made for light jobs.
FURY200XF is not one of them.
This machine is built for stainless fabricators, production teams and workshops that need serious weld-cleaning power without turning every job into a long clean-up.
It handles TIG and MIG welds, removes heavy heat tint and oxide, and leaves stainless looking the way it should before it leaves the workshop.
The integrated fluid feed pumps cleaning fluid through the work lead and handle, straight to the brush. You get steady flow, better control and fewer interruptions while you work.
FURY200XF cleans hard. Then it lets the finish speak for itself.
The weld cleaner with a temper.
FURY200XF is the machine for stainless workshops that are done waiting on weak alternatives.
It is built for heavy discolouration, long weld seams, demanding TIG and MIG welds, and daily cleaning work where speed and finish both matter.
This is not the entry point into Cougartron weld cleaning. It is the top of the FURY range.
Full 200A cleaning power. Fully integrated fluid feed. Built for welds that fight back.
When weld cleaning is the bottleneck, FURY200XF is the answer.
Why FURY200XF makes sense.
Full FURY cleaning power
With up to 200A of weld-cleaning output, FURY200XF is built for demanding stainless work, heavy heat tint, oxide, discolouration and longer weld seams.
Integrated fluid feed
The built-in tank and pump send fluid through the work lead and handle, straight to the brush.
Built for production work
This is a machine for workshops that clean stainless every day and need the weld cleaner to keep pace with the work.
Control at the cleaning zone
Adjust the fluid flow to suit the job and the operator. Keep the brush supplied without flooding the work or stopping every few minutes.
6m leads as standard
The 6m work lead and 6m earth lead give operators room to move around larger parts, benches and awkward fabrications.
More than weld cleaning
Use FURY200XF for weld cleaning, passivation, polishing and, with the correct marking set, marking and etching.
Fluid where you need it. Not everywhere else.
FURY200XF has a fluid tank built into the front of the machine.
The pump sends weld-cleaning fluid through the work lead and into the handle. From there, the wand and brush holder deliver fluid directly to the cleaning zone.
That means fewer pauses, better control and less time dealing with bottles while the job is waiting.
The display allows the operator to control the amount of fluid delivered to the brush, helping match the flow to the job.
Less stopping. Better flow. Cleaner work.
Made for welds that fight back.
FURY200XF is a strong fit for:
- Heavy stainless TIG welds
- Stainless MIG welds
- Wide weld seams
- Long weld runs
- Heavy heat tint removal
- Oxide and discolouration removal
- Weld cleaning and passivation
- Polishing stainless surfaces
- Daily production cleaning
- Large stainless fabrications
- Workshops moving away from pickling paste and grinding
- Marking and etching with the correct Cougartron marking set
When weld cleaning is part of your daily work, FURY200XF earns its place fast.
Where weaker machines slow down, FURY keeps working.
Light weld cleaners are fine until the work gets serious.
The welds get darker. The seams get longer. The oxide gets heavier. The operator starts waiting on the machine.
That is when weld cleaning becomes the bottleneck.
FURY200XF is built for jobs where cleaning speed, power, fluid flow and finish quality all matter at the same time.
That matters when you have more than one weld to clean.
It matters when the finish still has to face the customer.
It matters when rework is costing time.
No weak finish. No waiting for the machine to catch up.
No paste. No grinding. No heat tint leaving the workshop.
Pickling paste is slow, messy and unpleasant to deal with.
Grinding can change the surface, add rework and make a clean weld look rough.
Small weld cleaners can work well on easy jobs, then struggle when the oxide gets darker or the welds get longer.
FURY200XF gives stainless fabricators another way: heavy-duty electrochemical weld cleaning with integrated fluid feed and a cleaner final finish.
You have done the weld.
Do not let the clean-up make it look average.
The top FURY setup for serious stainless work.
FURY200XF sits at the top of the Cougartron weld-cleaning range for a reason.
Choose FURY100 when you need FURY-level cleaning but not the full 200A output.
Choose FURY100XF when you want 100A FURY power with integrated fluid feed.
Choose FURY200 when you want full 200A cleaning power without integrated fluid feed.
Choose FURY200XF when you want the hardest-hitting FURY machine with fluid feed built in.
This machine is not for everyone.
If you clean light TIG welds occasionally, it is more machine than you need.
If you clean demanding stainless every day and weaker machines are slowing the job down, this is FURY territory.
No oversized machine. No weak finish. Just the right Cougartron for the work.
What FURY200XF can do.
Weld cleaning
Remove heat tint, oxide, rust and discolouration from stainless TIG and MIG welds.
Passivation
Clean and passivate stainless after welding, leaving the surface ready for the next stage.
Polishing
Improve the final stainless surface finish with controlled polishing power.
Marking and etching
Add marking capability with a Cougartron marking set for logos, part IDs, serial numbers, batch data and traceability.
Choose the right FURY200XF setup.
FURY200XF is available in four set options.
Basic Set
Machine, large transport case, foam insert, 6m fluid-feed work lead, 6m earth lead and protective cover.
Starter Set A
Basic Set plus drip tray, cleaning and neutralising fluids, 1-, 2- and 3-brush fluid-feed wands, Fury brushes and workshop accessories.
Starter Set B
Starter Set A plus safety glasses, the Standard marking set and a stencil voucher.
Starter Set C
Starter Set A plus safety glasses, the Advanced marking set and a stencil voucher.
Not sure which set fits? Send us a photo of your welds and tell us how often you clean. We will help you choose the setup that makes sense.
Key features.
- Cougartron’s hardest-hitting weld cleaner
- Fully integrated fluid feed system
- Adjustable fluid delivery controlled through the display
- Front-mounted fluid tank
- 20-200A weld-cleaning range in 20A increments
- Highly adjustable amp and voltage settings
- Fast and effective cleaning for all kinds of TIG and MIG weld seams
- Built for heavy heat tint, oxide, rust and discolouration
- Weld cleaning, passivation, polishing, marking and etching
- 100% duty cycle
- Detachable handle
- 6m work lead and 6m earth lead supplied as standard
- Heavy-duty 35mm² output cable
- Compatible with 1-, 2- and 3-brush holders
- Large-diameter rubber wheels
- Collapsible steel handle
- Robust industrial case
- IP51 enclosure protection
- CE certified
Technical specifications.
| Feature | FURY200XF |
|---|---|
| Product type | Heavy-duty weld cleaner with fully integrated fluid feed |
| Power supply, 110V version | 110V AC, 50/60Hz, 32A |
| Power supply, 230V version | 240V AC, 50/60Hz, 16A |
| Dual-voltage 110/230V version | Not available |
| Weld-cleaning amp range | 20-200A, 20A increments |
| Weld-cleaning voltage range | 10-16V AC |
| Polishing amp range | 20-200A, 20A increments |
| Polishing voltage range | 10-12V DC |
| Marking amp range | 2-10A, 2A increments |
| Marking voltage | 12V AC |
| Duty cycle | 100% |
| Detachable handle | Yes |
| Input cable length | 4m |
| Output cable length | 6m |
| Output cable size | 35mm² |
| Brush holder options | 1, 2 or 3 |
| Fluid feed | Fully integrated |
| Machine size | W 39cm, H 64cm, D 33cm |
| Height with handle extended | 116.5cm |
| Enclosure protection | IP51 |
| Certification | CE |
FURY200XF set contents.
| Part no. | Description | Basic Set | Starter Set A | Starter Set B | Starter Set C |
|---|---|---|---|---|---|
| n/a | FURY200XF weld cleaner, machine only | x | x | x | x |
| WELC2064 | Large transport case | x | x | x | x |
| WELC5006 | Foam insert for large transport case | x | x | x | x |
| WELC2878 | Lead with handle, 6m, 200A, dinse connector with fluid feed | x | x | x | x |
| WELC2578 | Lead with earth clamp, 6m, 200A, dinse connector | x | x | x | x |
| WELC2911 | Protective cover, large, 1 pc | x | x | x | x |
| WELC2574 | Drip tray | x | x | x | |
| WELC3048 | CGT-550 Weld Cleaning & Polishing Fluid, 5L | x | x | x | |
| WELC3158 | CGT-N5 HyPerformance Neutralising Fluid, 5L | x | x | x | |
| WELC2891 | Wand/twist shroud set for fluid feed, 1 x M8 brush | x | x | x | |
| WELC2892 | Wand/twist shroud set for fluid feed, 2 x M8 brushes | x | x | x | |
| WELC2926 | Straight wand/twist shroud for fluid feed, 3 x M8 brushes | x | x | x | |
| WELC3149 | Fury brush, M8, 80A, 10-pack | x | x | x | |
| WELC2201 | Spray bottle with sprayer, 500ml, empty | x | x | x | |
| WELC2005 | Acid pot, 500ml, with lid | x | x | x | |
| WELC2630 | Microfibre cloth, 70 x 70cm, orange | x | x | x | |
| WELC2867 | Cougartron acid-resistant gloves, 1 pair | x | x | x | |
| WELC2868 | Cougartron safety glasses | x | x | ||
| WELC4045 | Marking set for weld-cleaning machine, Standard | x | |||
| STEN1029 | Stencil voucher, maximum size 150 x 100mm | x | x | ||
| WELC4956 | Marking set for weld-cleaning machine, Advanced | x |
FURY200XF set weights and part numbers.
| Description | Weight | 110V part no. | 230V part no. |
|---|---|---|---|
| FURY200XF Weld Cleaner – Basic Set | 60.0kg | WELC1124 | WELC1120 |
| FURY200XF Weld Cleaner – Starter Set A | 61.0kg | WELC1125 | WELC1121 |
| FURY200XF Weld Cleaner – Starter Set B | 64.3kg | WELC1126 | WELC1122 |
| FURY200XF Weld Cleaner – Starter Set C | 66.5kg | WELC1127 | WELC1123 |
Useful FURY200XF accessories.
- Mobile workstation, WELC2889 – helps contain fluid and organise regular weld-cleaning work.
- Orange extension lead, WELC2579 – 20ft, 200A dinse extension for the work lead.
- Black extension lead, WELC2580 – 20ft, 200A dinse extension for the earth lead.
Ready to see what FURY200XF can do?
Talk to us and we will bring it to you for a demonstration in your workshop, on your welds.
We will show you where FURY200XF fits, what setup makes sense and whether it earns its place in your workshop.
No weak finish. No oversized guesswork. Just the right Cougartron for your work.
FURY200XF data sheet.
Additional information
| Weight | N/A |
|---|---|
| Choose machine set | Basic Set, Starter Set A, Starter Set B, Starter Set C |
| Choose machine input voltage | 110V, 230V |
You may also like…
-
ProPlus Weld-cleaner 110/230V
Price range: £2,500.00 through £3,630.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
Fury200 Weld-cleaner 110/230V
Price range: £6,630.00 through £8,670.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
Furybrush (M8, 80A) – 10pcs
Price range: £296.00 through £320.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
Fury100XF Weld-cleaner 110/230V
Price range: £5,950.00 through £8,040.00Add to Cart This product has multiple variants. The options may be chosen on the product page
Related Products
-
-
-
-
Fury100 Weld-cleaner 110/230V
Price range: £4,930.00 through £6,920.00Add to Cart This product has multiple variants. The options may be chosen on the product page