Power30 Weld-cleaner 110/230V
Price range: £1,220.00 through £2,100.00
Precision weld cleaning for smaller stainless work.
Power30 is a lightweight, portable weld cleaner for stainless TIG welds.
It gives you two cleaning modes: a lower-voltage mode for lighter TIG welds and extended brush life, and a higher-voltage mode for darker welds or welds with more oxide. It also includes a marking mode when used with the correct marking set.
A strong fit for smaller workshops, on-site work, thin stainless, light-to-medium TIG welds, and users who want a compact machine with proper Cougartron control.
Which set?
- Basic: machine + cables only
- A: best first time setup
- B: Set A + Standard Marking set
- C: Set A + Advanced Marking set
Description
Small machine. Sharp control.
Power30 is a compact Cougartron weld cleaner for stainless TIG work where control matters.
It is built for lighter welds, smaller components, thinner stainless and workshops that want clean results without jumping straight to a heavy-duty machine.
Use it to remove heat tint, oxide and discolouration after TIG welding, with two cleaning modes, simple setup and proper control at the brush.
Not every weld needs brute force.
Some need a cleaner touch.
Not every job needs maximum amps.
Some stainless jobs are not about throwing more power at the surface.
They are about control.
Power30 is made for stainless TIG welds, smaller parts, thinner material, detail work and everyday workshop jobs where the finish still has to look right.
It gives you a compact way to remove heat tint and discolouration without turning the job into a bigger clean-up than it needs to be.
Small enough to carry. Controlled enough to earn its place.
Why Power30 makes sense.
Built for TIG weld cleaning
Power30 is designed for stainless TIG welds, especially where the job needs controlled heat tint removal without excessive power.
Two cleaning modes
Use the lower-voltage mode for lighter TIG welds and extended brush life. Use the higher-voltage mode for darker welds or welds with more oxide.
Better control on smaller work
The 5-30A output range, adjustable in 5A increments, gives operators useful control for light-to-medium stainless TIG work.
Compact and portable
The built-in handle, low weight and robust transport case make Power30 easy to move around the workshop or take to site.
100% duty cycle
Power30 uses high-power electronics designed to run cooler, so the machine keeps working when the job keeps going.
Fluid-feed compatible
Power30 can be used with Cougartron FL10 or FL20 fluid feed systems when you want fewer stops and a smoother cleaning rhythm.
Made for controlled stainless work.
Power30 is a strong fit for:
- Stainless TIG welds
- Light-to-medium weld discolouration
- Heat tint removal
- Oxide removal on TIG welds
- Thin stainless parts
- Smaller components
- Detail work
- On-site stainless work
- Workshop repair jobs
- Light production work
- Jobs where brush life and control matter
- Electrochemical marking with the correct marking set
If the work is smaller, neater and still needs the finish to look right, Power30 is the right kind of machine.
Stop grinding small stainless jobs into bigger ones.
Pickling paste is slow and unpleasant.
Grinding can change the surface, mark the part and make a neat TIG weld look rough.
Power30 gives you a cleaner way to deal with heat tint and discolouration on stainless TIG welds, especially on smaller work where control matters.
It does not try to be the biggest machine in the range.
It gives you the right amount of bite for cleaner TIG work.
Two cleaning modes. One compact machine.
Power30 gives operators two weld-cleaning modes, so the machine can be matched to the weld instead of treating every job the same.
Mode 1
Lower voltage output for lighter TIG welds and extended brush life.
Mode 2
Higher voltage output for darker TIG welds or welds with more oxide.
Marking mode
Use Power30 for electrochemical marking when fitted with the correct Cougartron marking set, purchased separately.
Light welds need control. Darker welds need more bite. Power30 gives you both.
Compact precision. Real Cougartron bite.
Power30 sits between the entry-level PowerOne and the more capable Power30X and ProPlus machines.
Choose Power30 when you want compact TIG weld cleaning with better control, but do not need polishing or heavy-duty FURY-level power.
It is not built to replace FURY on heavy daily weld cleaning.
It is built for the jobs where a lighter, more controlled machine makes more sense.
Clean the weld. Control the heat. Protect the finish.
Built to move with the job.
Not every stainless job happens at the same bench.
Power30 is light, compact and easy to carry, with a built-in handle and robust transport case for real workshop and site work.
Use it in the workshop, take it to site, or extend the working distance with compatible 4m Cougartron extension leads when the job is away from the power source.
Less dragging parts around. More cleaning where the work actually is.
Where Power30 sits in the Cougartron range.
Power30 is the compact precision machine.
- Choose PowerOne when budget is the main driver and you need a simple first weld cleaner.
- Choose Power30 when you want compact TIG weld cleaning with sharp control.
- Choose Power30X when you want compact control plus polishing and broader capability.
- Choose ProPlus when you need more bite for regular stainless workshop use.
- Choose FURY when weld cleaning becomes heavy, daily or production-led.
Power30 has a clear place: smaller stainless TIG jobs, thinner material, on-site work and customers who want control without buying more machine than they need.
Key features.
- Compact Cougartron weld cleaner for stainless TIG welds
- Two cleaning modes for lighter and darker TIG welds
- Mode 1: lower voltage for lighter TIG welds and extended brush life
- Mode 2: higher voltage for darker TIG welds or more oxide
- 5-30A weld-cleaning range in 5A increments
- Marking mode with optional Cougartron marking set
- 100% duty cycle
- Dual input voltage for use with 110V or 230V power supplies
- Compact and easy to transport
- Built-in handle
- 4m work lead and 4m earth lead supplied as standard
- Compatible with optional 4m extension leads
- Cougartron twist shroud for controlled brush length
- Splash-proof membrane control panel
- Fluid-feed compatible with FL10 or FL20
- IP51 enclosure protection
- CE certified
Technical specifications.
| Feature | Power30 |
|---|---|
| Product type | Compact weld cleaner for stainless TIG welds |
| Power supply | 110-230V AC, 50/60Hz, 4A |
| Weld-cleaning amp range | 5-30A, 5A increments |
| Weld-cleaning voltage range | 10-14V AC |
| Polishing amp range | N/A |
| Polishing voltage range | N/A |
| Marking amp range | 2-10A, 2A increments |
| Marking voltage | 10V AC |
| Duty cycle | 100% |
| Detachable handle | No |
| Input cable length | 1.5m |
| Output cable length | 4m |
| Output cable size | 10mm² |
| Brush holder options | 1 |
| Fluid-feed compatible | Yes |
| Size, machine only | H 378mm with handle raised, W 220mm, D 170mm |
| Enclosure protection | IP51 |
| Certification | CE |
Power30 set contents.
| Part no. | Description | Basic Set | Starter Set A | Starter Set B | Starter Set C |
|---|---|---|---|---|---|
| n/a | Power30 weld cleaner, machine only | x | x | x | x |
| WELC2047 | Lead with handle, 4m, 50A, x-connector | x | x | x | x |
| WELC2118 | Lead with earth clamp, 4m, 50A, x-connector | x | x | x | x |
| WELC2226 | Wand/twist shroud set for 1 x M6 brush | x | x | x | x |
| WELC2005 | Acid pot, 500ml, with lid | x | x | x | x |
| WELC2149 | Microfibre cloth, 40 x 40cm, orange | x | x | x | x |
| n/a | Country-specific power lead | x | x | x | x |
| WELC2910 | Protective cover, small, 1 pc | x | x | x | x |
| n/a | Cardboard packaging with polystyrene insert | x | |||
| WELC2064 | Large transport case | x | x | x | |
| WELC5006 | Foam insert for large transport case | x | x | x | |
| WELC3092 | Power-brush, M6, 30A, 5 pcs | x | x | x | |
| WELC3081 | CGT-550 Weld Cleaning & Polishing Fluid, 1L | x | x | x | |
| WELC3165 | CGT-N5 HyPerformance Neutralising Fluid, 500ml | x | x | x | |
| WELC2092 | Sprayer for spray bottle, orange | x | x | x | |
| WELC2867 | Cougartron acid-resistant gloves, 1 pair | x | x | x | |
| WELC2868 | Cougartron safety glasses | x | x | x | |
| WELC4045 | Marking set for weld-cleaning machine, Standard | x | |||
| STEN1029 | Stencil voucher, maximum size 150 x 100mm | x | x | ||
| WELC4956 | Marking set for weld-cleaning machine, Advanced | x |
Power30 set buying information.
| Description | Weight | Part no. |
|---|---|---|
| Power30 Weld Cleaner – Basic Set | 8.41kg | WELC1070 |
| Power30 Weld Cleaner – Starter Set A | 15.28kg | WELC1071 |
| Power30 Weld Cleaner – Starter Set B | 18.44kg | WELC1072 |
| Power30 Weld Cleaner – Starter Set C | 20.64kg | WELC1073 |
Useful Power30 accessories.
- FL10 or FL20 Fluid Feed System – adds fluid feed for fewer stops and better brush control.
- Mobile equipment stand – gives the machine a cleaner place to sit and move around the workshop.
- Mobile workstation – helps control the mess around regular weld cleaning work.
- 4m extension leads – useful when the job is away from the power source.
- Power-brush replacements – keep spare M6 brushes ready so cleaning does not stop mid-job.
- Marking set – adds electrochemical marking capability for logos, part IDs, serial numbers and traceability.
Not sure if Power30 is enough?
Send us a photo of your welds, the material thickness and how often you clean stainless.
We will tell you whether Power30 fits the job, or whether PowerOne, Power30X, ProPlus or FURY makes more sense.
No oversized machine. No weak finish. Just the right Cougartron for the work.
Power30 data sheet.
Additional information
| Weight | N/A |
|---|---|
| Choose machine set | Basic Set 110-230V, Starter Set A 110-230V, Starter Set B 110-230V, Starter Set C 110-230V |
You may also like…
-
CGT-550 Weld Cleaning & Polishing Fluid
Price range: £59.00 through £147.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
Marking set for weld-cleaning machine
Price range: £335.00 through £690.00Add to Cart This product has multiple variants. The options may be chosen on the product page
Related Products
-
CGT-N5 HyPerformance Neutralising Fluid
Price range: £53.00 through £117.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
CGT-350 Weld Cleaning Fluid
Price range: £59.00 through £147.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
Power30X Weld-cleaner 110/230V
Price range: £1,920.00 through £3,020.00Add to Cart This product has multiple variants. The options may be chosen on the product page -
