PowerOne Weld-cleaner 110/230V – Starter Set
£1,260.00
The first step into proper Cougartron weld cleaning.
PowerOne is a compact, budget-friendly weld cleaner for light-to-medium stainless work.
It is a strong fit for smaller workshops, maintenance teams, first-time users, and occasional stainless fabrication jobs where the finish still needs to look right.
No pickling paste.
No grinding back a clean weld.
No heat tint leaving your workshop.
Best for: lighter TIG/MIG welds, smaller stainless jobs, maintenance work, mobile use, and workshops moving away from paste.
Description
Proper weld cleaning for smaller workshops.
PowerOne is the first step into Cougartron weld cleaning.
It is built for smaller workshops, maintenance teams, first-time users and lighter stainless work where paste, grinding or hand finishing are slowing the job down.
Use it to remove heat tint, oxide and discolouration from stainless TIG and smaller MIG welds, while helping the finished part leave the workshop looking the way it should.
No pickling paste. No grinding back a clean weld. No heat tint leaving the workshop.
A smart first Cougartron for workshops that still care about the finish.
You do not need the biggest machine to clean stainless properly.
Not every workshop needs a FURY on day one.
PowerOne is for jobs that still matter, even when they are not heavy production jobs: smaller stainless parts, light-to-medium TIG welds, maintenance work, occasional fabrication and mobile jobs where a compact machine makes sense.
It gives you a practical way to move away from paste and grinding without buying more machine than the work needs.
PowerOne is not the hardest-hitting weld cleaner in the Cougartron range.
That is exactly the point.
It earns its place by doing everyday stainless jobs properly.
Why PowerOne makes sense.
Budget-friendly Cougartron cleaning
PowerOne gives workshops a practical entry point into electrochemical weld cleaning without stepping straight into a heavy-duty production machine.
Built for smaller workshops
A strong fit for lighter stainless work, occasional fabrication, repair jobs, maintenance teams and first-time weld-cleaner users.
Compact and portable
PowerOne is easy to move around the workshop, take to the job or use where space is limited.
Better than paste or grinding
Pickling paste is slow and unpleasant. Grinding can change the surface and make a neat weld look rough. PowerOne gives you a cleaner way to finish stainless welds.
Fluid-feed compatible
PowerOne can be used with the FL21 fluid feed system when you want fewer stops, better fluid control and a smoother cleaning rhythm.
Simple to use
Built for operators who need a machine that gets on with the job without turning weld cleaning into a complicated process.
Made for everyday stainless jobs.
PowerOne is a strong fit for:
- Light-to-medium TIG welds
- Smaller MIG welds
- Stainless fabrication work
- Maintenance and repair jobs
- Heat tint removal
- Oxide and discolouration removal
- Light passivation work
- Smaller parts and assemblies
- Mobile stainless work
- Workshops moving away from pickling paste
- First-time weld-cleaner users
If your work is light, regular and still needs a clean finish, PowerOne is the right place to start.
Stop making small stainless jobs harder than they need to be.
A good weld can still leave the workshop looking unfinished.
The heat tint is still there. The oxide is still visible. The customer still sees the brown weld.
That is where PowerOne makes sense.
It gives smaller workshops a cleaner way to remove heat tint and oxide from stainless welds without reaching for paste, grinding discs or slow hand finishing.
PowerOne does not try to be the biggest machine in the range.
It gives you enough bite for jobs that should already be leaving the workshop cleaner.
Entry-level price. Real Cougartron bite.
PowerOne is the entry point into Cougartron weld cleaning.
It is not built for the same workload as FURY. It does not need to be.
Choose PowerOne when you want a compact, affordable weld cleaner for lighter stainless work and smaller workshop jobs.
Step up to Power30, Power30X, ProPlus or FURY when the work becomes heavier, longer, darker or more production-led.
PowerOne gives you less amp control than higher-end Cougartron machines, so thin materials and delicate surfaces need the right working technique.
No oversized machine. No weak finish. Just the right Cougartron for the work.
No paste. No grinding. No brown welds leaving the workshop.
Pickling paste is slow, messy and unpleasant to deal with.
Grinding can change the surface, add extra finishing work and make a neat weld look rough.
Hand finishing eats time and still leaves you hoping the result is good enough.
PowerOne gives you a better option for smaller stainless jobs.
Clean the weld. Improve the finish. Move the job on.
You did the weld. Do not let the clean-up make it look average.
Add FL21 when you want a smoother workflow.
Manual dipping works fine for short jobs.
But once weld cleaning becomes regular, the small stops start to add up.
The brush dries out. The bottle gets moved around. The operator stops, dips, cleans and stops again.
PowerOne is compatible with the FL21 fluid feed system, developed specifically for PowerOne. It feeds cleaning fluid to the brush tip, helping you keep the job moving with fewer interruptions.
PowerOne does the cleaning. FL21 makes the workflow cleaner.
Where PowerOne sits in the Cougartron range.
PowerOne is the simple first step into proper Cougartron weld cleaning.
- Choose PowerOne when budget matters and you need a compact first weld cleaner for lighter stainless work.
- Choose Power30 when you want compact TIG weld cleaning with sharper control.
- Choose Power30X when you want compact control plus polishing and marking capability.
- Choose ProPlus when you need more bite for regular stainless workshop use.
- Choose FURY when weld cleaning is heavy, daily or production-led.
PowerOne has a clear place: smaller jobs, lighter stainless work, maintenance use and workshops buying their first Cougartron.
Key features.
- Cougartron’s most accessible weld cleaner
- Entry-level price point without shortcuts on safety or design
- Compact and easily transportable
- Suitable for light-to-medium stainless weld cleaning
- Removes heat tint, oxide and post-weld discolouration
- Good fit for TIG welds and smaller MIG welds
- Weld cleaning and marking capability
- 100% duty cycle
- Dual input voltage for use with 110V or 230V power supplies
- 4m work lead and 4m earth lead supplied as standard
- Excellent power-to-weight ratio
- Splash-proof membrane control panel
- Easy to wipe clean
- Fluid-feed compatible with FL21
- IP51 enclosure protection
- CE and RCM certified
Technical specifications.
| Feature | PowerOne |
|---|---|
| Product type | Compact weld cleaner for light-to-medium stainless work |
| Power supply | 110-230V AC, 50/60Hz, 8A |
| Weld-cleaning amp range | 0-80A |
| Weld-cleaning voltage range | 10V AC |
| Polishing amp range | N/A |
| Polishing voltage range | N/A |
| Marking amp range | 10A |
| Marking voltage | 10V AC |
| Duty cycle | 100% |
| Detachable handle | No |
| Input cable length | 1.5m |
| Output cable length | 4m |
| Output cable size | 16mm² |
| Brush holder options | 1 |
| Fluid-feed compatible | Yes, with FL21 |
| Size, machine only | H 378mm with handle raised, W 220mm, D 170mm |
| Enclosure protection | IP51 |
| Certification | CE, RCM |
PowerOne Starter Set contents.
| Part no. | Description |
|---|---|
| n/a | PowerOne weld cleaner, machine only |
| WELC2907 | Lead with handle, 4m, 80A, x-connector |
| WELC2919 | Lead with earth clamp, 4m, 80A, x-connector |
| WELC2470 | Wand/twist shroud set for 1 x M8 brush |
| WELC2005 | Acid pot, 500ml, with lid |
| WELC2149 | Microfibre cloth, 40 x 40cm, orange |
| n/a | Country-specific power lead |
| WELC2064 | Large transport case |
| WELC5006 | Foam insert for large transport case |
| WELC3148 | Furybrush, M8, 80A, 1 pc |
| WELC3081 | CGT-550 Weld Cleaning & Polishing Fluid, 1L |
| WELC2910 | Protective cover, small, 1 pc |
PowerOne Starter Set.
| Description | Weight | Part no. |
|---|---|---|
| PowerOne Weld Cleaner – Starter Set, 110-230V | 8.41kg | WELC1128 |
Useful PowerOne accessories.
- FL21 Fluid Feed System – adds fluid feed developed specifically for PowerOne.
- Mobile equipment stand – gives the machine a cleaner place to sit and move around the workshop.
- Mobile workstation – helps control the mess around regular weld-cleaning work.
- 4m extension leads – available in orange and black when the job is away from the power source.
- Replacement Furybrushes – keep spare M8 brushes ready so cleaning does not stop mid-job.
- Replacement twist shroud – compatible with the PowerOne wand.
Not sure if PowerOne is enough?
Send us a photo of your welds and tell us how often you clean stainless.
We will tell you whether PowerOne fits the job, or whether Power30, Power30X, ProPlus or FURY makes more sense.
No oversized machine. No weak finish. Just the right Cougartron for the work.
PowerOne data sheet.
Additional information
| Weight | 8.4 kg |
|---|
