Weld cleaning consumables
Choose replacement carbon fibre brushes for Cougartron weld cleaning, passivation and polishing work.
The right brush depends on your machine, output range, weld access and whether you are cleaning light TIG welds or heavier stainless fabrication.
How to choose
Start with your Cougartron machine. Powerbrush is normally used with Power30 and Power30X. Superbrush is used with ProPlus and FURY machines up to 80A. Furybrush is used with PowerONE and FURY machines.
Lighter TIG cleaning needs a smaller brush and lower output. Heavier TIG, MIG and darker oxide usually need a thicker brush and more machine power.
Use the brush size and holder that gives good contact without forcing the fibres. Tight corners, pipe welds and long seams may need different brush setups.
Products
Find Powerbrush, Superbrush, ThunderBrush and Furybrush options for Cougartron weld cleaning machines.
Send us your machine model and a photo of your holder or current brush. We can help confirm the right replacement before you order.
Ask us before ordering →Showing all 4 results
Powerbrush is the M6 carbon-fibre brush for lighter TIG welds, detail work and electrochemical cleaning or polishing up to 30 A per brush. Supplied in packs of 10 with copper- or stainless-steel-crimp options.
Thick weld cleaning brush with a dense fiber structure to help cover larger surface area. It is used in more demanding weld cleaning operations (50-80 Amps power output).
Furybrush is the M8 carbon-fibre brush used with PowerOne and Cougartron FURY machines for demanding TIG and MIG weld cleaning and electropolishing up to 80 A per brush. Supplied in packs of 10.
Superbrush is the higher-capacity M6 carbon-fibre brush for regular workshop cleaning, heavier TIG welds and electrochemical polishing up to 50 A per brush. Supplied in packs of 10.
Brush types
A lighter brush for Power30 and Power30X machines. Best for lighter TIG welds and controlled cleaning or polishing work.
A thicker brush for more demanding cleaning and polishing work with ProPlus and FURY machines up to around 80A.
A dense brush option for larger contact area and more demanding weld cleaning where coverage and output matter.
A heavy-duty brush for PowerONE and FURY machines, suited to longer welds, heavier oxide and high-output weld cleaning.
Buying help
Start with your machine model. Powerbrush is normally used for Power30 and Power30X. Superbrush suits ProPlus and FURY machines up to around 80A. Furybrush is used with PowerONE and FURY machines for heavier cleaning.
Some brushes can be used for both cleaning and polishing, but the correct fluid, output and process matter. If finish quality is important, confirm the full setup before ordering.
Brush size affects contact area, cleaning speed, access and control. A larger or denser brush can clean faster on open welds, while smaller brushes are easier to control in tight spaces.
Use the correct output, avoid forcing the brush, keep the brush properly wetted with cleaning fluid and use the right sleeve or shroud where needed.
Yes. Cougartron weld cleaning brushes can be used on exterior and interior pipe welds, tight corners and detailed stainless fabrication when matched with the right holder and technique.
Send your machine model, a photo of your current brush or holder, and a short note about the welds you clean most often.
Need the right brush?
Brushes are not always universal. If you are unsure, send us your machine model and a photo of your holder or current brush.